Tag Archives: sculpted

Painting WIP: Two headed Troll Sculpt

11 Feb

DSCF3818

So, I’m getting through loads of stuff paintwise, that needs doing, and this has been put off for ages. This is of course, my own two headed troll sculpt thats been waiting for a long time. You’ll have to excuse the shadow on many of these pics due to the lack of natural light and my ability to adjust my camera exposure to the correct levels, but I’ve tried, just so I can give you a look at how he’s progressing (and keep me on track with all my progress)

Spurred on by recent old-skool Grenadier troll, its given me a proper kick up the arse to get his buddies done, and Fnar-frag has been next in line.

He’s a big feller this troll (You’ll see when hes done compared to the rest of his folks) but as a personality within them, I really wanted him to stand out. When I sculpted him, it was intended that he’d fulfill a leadership role of some kind within this section of trolls, yet I think I might make him an army standard instead. The reason being that of the odd pose with his hand. Originally I was going to make a goblin puppet on wires that the corresponding side had been playing with. Just is that I constantly kept changing my mind about it, so having tried a few options out previously, I think now he’s going to get an appropriate sized standard instead, as theres still a lot of work to do with the figure until I’m happy with it. Of course, I’ll pop up more WIP as I go on, but for now this is as far as I am (as of this afternoon)

DSCF3823

DSCF3824

The scheme I chose was a genestealer-ish one that would match the grenadier one (not that it does really, but most of my trolls are from different places, so for me its not really a problem) The intention is to paint up each unit in the troll army with a different colour scheme (grey stone trolls coming soon, and some greenies as well, just that I’m sick of painting stuff green lately) Theres loads of highlighting left to do on his scaly back, plus outlining and other bits. Like I said this is not a small figure, so with an added standard, etc, theres loads of hours work for me left.

DSCF3815

DSCF3816

I think he’s ok how its gone in both sculpting and painting up, but I think the next ones I do will come out better each time. I think I could get fine in making trolls, so much in fact if there were any takers, I’d do a whole lot of other trolls in a range, multipart that is, all with interchangable heads and weapons, then you’d get some nice variety and combos. They wouldn’t be as big, but just as mean and cartoony. Realistic they aint never going to be, as what is the point? I like it anyway!

DSCF3820

I’ll be back later with some painted bits from my 15mm space orc army and no doubt more drivel….

 

Wargames Supply Dump get set to release the Draxxon!

31 Jan

DSCF3783

So I’m here briefly to talk about the Draxxion sculpts I sold on a while ago to Roger at Wargames Supply Dump. I’ve not had much time for the net lately, trying rather to get back on track with stuff, mostly painting and planning designs and such. Roger kindly sent me some finished castings of them to paint up, which I finally got around to (also, you read rogers blog post about them here)

If you are a regular here, you might remember the greens I made, they were ok, but as much of my stuff, they were a brain fart based on my idea. the only thing was I wasn’t entirely happy with the concept vs how they turned out, that’s why I ended up selling them on. No doubt a new and improved version of the Draxxion will emerge at some point, there are a few other ideas brewing that will come first!

DSCF3770

DSCF3771

The Brood leader turned out pretty good, I always liked that one, the other overseer guard was ok too. They’re also pretty big beasts compared to the 15mm-ish forces they were percieved to face. You could say that these would make good 25-28mm troops as well depending. The Draxx were always designed to be big buggers, as you would imagine being dragons at various stages of age and growth (so, thats how I’ll use them, but I’ll get into that later…)

DSCF3772

DSCF3773

Onto the smaller brood, we’ve got the scout (well, that’s my take on it) it’s still big if you compare it to 15mm stuff, but he’s a step down from the elites. He’s got a studious look to him, definite leader material, or advisor in some shape or form.

DSCF3774

DSCF3775

Next up is the next size down, some kind of heavy, quite a oriental feel to him (the head at least) he’ll make a fine leader for a heavy weapons detachment I’m planning.

DSCF3776

DSCF3778

Last, are the smaller 15mm-ish brood warriors. A load of these would be great, filling in the gaps of the battle force (which I don’t have, but I do have some additions of my own for my wargaming purposes!)

DSCF3781

DSCF3782

As with a lot of the figures I sculpt, there are plenty of uses for these, in scales from 15mm, 20mm and more, it’s up to you! You’ll have to forgive my paintwork and my pics, with lighting being bad, it’s tricky to get the desired effect I want, plus I don’t know where my glasses are, so it makes it even harder to see (but, I’ll soldier on.)

Like I’ve mentioned, I’ll be making a Draxx warband using these, and some other stuff I have around, and these will make a good start as the command section. I’ll post the progress soon.

I hope that these figures are useful to some of you, it gives me a buzz to know that other people might collect, paint and game with any of the stuff I create from random brainfarts, and indeed any ideas my head spawns, and remember I appreciate any constructive comments pertaining to anything raised here.

I’ll be back later with more miniature and wargaming dooings (It’s about time I brought it back in line) once I have sorted a few bits and caught up with webby stuff.

ciao!

 

Mini Sculpting: 28mm Ettin/2 headed troll; Fnar-frag the two faced!

6 Mar

DSCF3284

Ok, you’re going to have to forgive my net connection, it’s not great at the best of times, but like I have told you before, I promised to show you some stuff I have been working on.

This is a personal WIP for my WFB orc and gobbo army, mainly my troll mob. I must admit that trolls are my fave lot out of the orc stuff, and have scored me many victories while using them in game. The only trouble I find with them is the fact that they are so darned expensive to buy, so I spend plenty of time searching around different places for old troll figures to use as proxies, so much that I decided to add to my ranks by making some myself.

DSCF3273

I thought I’d make him of the two headed variety, after rewatching “Troll Hunter” I thought it would stand out more than the usual type, and that he’d serve best for part of my command section of my two units. First thing you might notice is the weird positioning of his hand. This is for a reason, I wanted him to be holding a goblin marionette puppet on strings. However that still might change if I decide otherwise, but for now thats the plan.

DSCF3280

DSCF3281

Also I wanted him to exhibit a left/right personality, sort of good cop/bad cop, so that’s why the puppet holding side has a goofy, child like  essence to it, while the other is more “business” orientated and ready for some pagga!

DSCF3282

Also, I wanted his gait to reflect that being a troll, he really needed to be quite deformed and twisted, especially with having the two headed mutation, so the slight twist in his stride is intentional. I wanted him to match the other trolls I have, so he needed plenty of warty scales, which will highlight nicely when painted in contrasting colour, oh yeah, and popeye type fore arms too!

I think it’s great the fact that GW old school trolls have the definitive cartoon look to them, which I needed to try and match, especially with him being more of a character figure than the usual rank and file troll. Lots of you might know that I sometimes diss GW, but it also matches my own style of modelling in a cartoon look, and seeing as though it’s going to be used for oldhammer and 6th Ed WFB, I don’t see the problem. Before anyone mentions the base, he’s now glued onto a 40×40 monster sized base with gluegun glue, just because it is a quick and easy way of adding a durable texture instead of sculpting it on, oh the many uses of the humble gluegun!!

I really want to release my own range of 28mm trolls and troll kin in the future hopefully, maybe a KS (ok, so don’t moan about crowdfunding, I actually think stuff like Kickstarter is a fine idea and many out there are a bit sick of the whole thing, but it does serve a purpose) I have quite a few ideas for several different types of troll races that would fit nicely into the O&G army lists, as proxies for the various troop types rather than the regular Orcs and their ilk.

Next up will be a decent paint job once I finsih the puppet goblin, or war yoyo, or even a human casualty (still not 100% on what to do) but I’ll show you once the next bit has been done.

Next up, is my Oggam settlement board (once my connection will allow more uploads)

Tally ho miniature chums!

Enhanced by Zemanta

That’s Ent-ertainment!! own sculpted Ent for my Entish hordes!!

20 Feb

If you remember, I showed you lot a pic of the Fanticide Blood tree warband a bit ago, and well, it did inspire me to go out and look at what miniatures of a similar vein are available out there. After hours of searching and looking, I found all sorts of stuff from all sorts of different manufacturers and companies, some good, some not so. So it dawned on me that, I should start a little fantasy warband of my very own to add a splash of Entish goodness to my collection. the idea is to create the warband/army so it can be used in either 15mm or 25/28mm for some fantasy based skirmishing battles, something I have missed doing for a few years. It’s different, unusual and something I haven’t done before having an Entish horde, and I suppose it’s exactly why the fanticide blood trees were done (plus, I can get some of them as well to add to my mix!)  I made a few mini orders here and there, and as ever I now wait for postie to fetch me my goodies.

Not being a patient sort, I thought I would get out the greenstuff and create myself one or two (or more) of these creatures for myself as some of them can be quite expensive, as well as adding my own personal touch to my fledgling army (or should that be sapling?)

Here I present to you, the first of my own sculpted Ents, Oak Horn the Grim

DSCF2046DSCF2047

DSCF2049

DSCF2050

I’m actually quite proud of how it turned out, he has got a load of character and will add a great level of variety to my forces. It has made me want to create more of these for my use, although I will be making them all totally different, the tree theme should tie them all together nicely! Here’s a few out door shots, in a more naturalistic setting (My back garden that is!)

DSCF2023

DSCF2027

DSCF2028

For those who would like to see some idea of scale, here you go a 30mm-ish Minotaur (You may recall Boris who features in a few of my size comparison shots from time to time!) and the Pendraken 10mm Minos (as I said before these are pretty much the size of a 15mm figure, so bear that in mind)

DSCF2051

I’ll post the newer additions as and when I get them done, but I do hope you enjoy!!

Peace out tree lovers….

Enhanced by Zemanta
%d bloggers like this: