Tag Archives: salvage crew

For sale: 15mm Black Dog Salvage Co. model terrain up for auction!

19 Jan

DSCF1354

Some time ago, you may recall (If your a regular reader that is…) that I showed you a 15mm sci-fi building terrain piece entitled “The Black Dog Salvage company” which I made for games of the free wargame, Salvage Crew.

Due to lack of space, I am reluctantly having to let it go. Sure I’ve used it a few times, and I did enjoy the experience of creating it in the first place, so I’m not too gutted. I think that it’s time to let another person enjoy the model in their 15mm scifi wargames.

To be honest, I have to make way and space for some bigger terrain pieces for my Oggam table, and I have very few specific bits that fit completely with the salvage company building. In an ideal world I would be creating huge cityscapes and dioramas, but I just don’t have the room anymore that fulfill most of my artistic aspirations, so it’s really gotta go. Priorities and all that.

It’s now live on Ebay, so if you fancy having a go at bidding on it, get on over there and take a look http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=131097001003

 

Enhanced by Zemanta

Black Dog HQ landing pad scenic WIP

16 Dec

Every time I walk past the HQ model of the Black dog building I made, I get the urge to start expanding the scenery how I had intended to originally. I do then, realise that this kind of thing needs time devoted to it.

Yesterday, I had a couple of hours spare to get something going again with the Black dog terrain set/board. You will probably remember the junk shuttle I started a while ago. Well, this piece is part of my intended expansion for the HQ facility. Lets face it, every business needs a handy transport link nearby to allow its employees to get to work on time!

As you can see from the pics, all I have got done so far is  getting a few dark grey coats on the board, plus a liberal spray of silver paint to highlight (after these were taken, I gave it a wash of black to tone down the shininess of both the shuttle and the board)

The shots are there to show how the bits are intended to fit together. Also, I would like to point out that the security wall around the pad’s compound has now been altered to acommodate an additional entrance that leads nearer to the HQ, and allows access for troops to move through the models more realistically (you’ll see that in future updates)

DSCF1805

DSCF1806

DSCF1807

DSCF1808

DSCF1809

DSCF1810

DSCF1811

DSCF1812

DSCF1814

DSCF1816

DSCF1817

DSCF1821

DSCF1822

As you can see, there is a shed load more stuff to do on this piece, but it’s shaping up fine. I’ll post the next shots once I get some of the details added (barrier, ticket booth with robo teller, more tubing/wires, more lighting, refuelling aparatus, signage etc etc…)

TTFN

Enhanced by Zemanta

15mm scratch built junk shuttle craft WIP

27 Oct

So I’m back to doing my 15mm salvage crew HQ. So far I have done my main admin block/junkyard, and I had another piece part done that goes on the front of it, a section on road with odds and sods on it.

However, a good examination of the model revealed it was bland. Hardly anything of value to it, very plain and boring.#

So I have decided to change it. The Black dog salvage co. really needed something to get their staff from A to B and to work on time, so instead of the road and rounabout turn, I made it into a small space taxi port with a landing pad (I’m still working on that so pics later)

As you can imagine, I needed to think about what was going to land on it as I started to make the pad.

A small company shuttle would do the trick! I admit, I had again cut myself out more work to do, and got carried away building the craft and got sidetracked from the main objective of the port. (Photos when I have tweaked the design a little and added customs/ticket booth with robot assistant, more billboards and dressing etc!)

So here is the work so far, I painted it up with a bit of metallic bronze/brown/silver/black, just to show up a bit more of the craft so I could work on it better. A lot of bits were quite hard to see on the model (They were made from clear plastic packaging) I think it helped show me what I need to do next, with more fine detail and such, so please don’t think i’m going to leave it like this!

Again, i used junk-fu scratch building skills, with the main body being a cigarette packet, other stuff like a hacked up toy car, broken toy bits, plastic packaging, card, wires, parts of a scrapped RC helicopter I cut up, bottle tops, straws, cig filters and bits from my tecchie bits box.

Like I said, it’s a bit rough round the edges, but it’s starting to take shape and it was a darn sight cheaper than trying to find something similar (it cost me nothing to make!)

I’ll keep you posted on it’s progress, hopefully I will have a shuttle port to go with it (A bit more work before that I’m afraid!)

TTFN

Enhanced by Zemanta

The Black Dog Salvage Co. Finished at last!!

9 Oct

So, I finally got the model finished. I can now tick it off on my “to do” list! I had thought it was a good idea to let everyone see what the end result looks like. I can take you through a few stages to completion, I do add that this is more for my sake than anything, it helps me remember to photograph each stage and get into the habit (I’m pretty absent minded when I get caught up in making things!)

The next step was to finish the black windows on all the structures, as well as a bit of touching up bits on the model. After this, I began to build up layers of flock and scatter, Grey/tarmac type, Dark green patches, static grass and grey ballast to give a scruffy unkempt wasteland industrial feel. A few bits of moss and it was ready to go for the next stage.

I spent a while taking measurements of the areas that required signage, then proceeded to convert them into a set of appropriate signs and additions on my DTP software.  I did a fair few warning signs and cctv ones, as I thought the fortified nature of the scrap compound warranted high security! After they were printed out on card stock and paper, I just stuck them on and hoped for the best! I’m pretty pleased with the results, it has turned out much better than I had hoped, I’m sure I will still add a few bits and bobs, but I’m happy with it at the moment. Here’s the finished shots, I hope you like!

Custom Black Dog Billboard poster!!

Back view.

Both spotlights are working! There will be no escape for trespassers!

You may have wonered why the base still has a visible lip that might need filling. There is a good reason, the wooden base of the model is a bit of laminate floorboard and my plan is to use this locking system to join my additional models to it (there is a road section that fits in front of this one, pics when i get it done!) So, I haven’t made a mistake!!

This model is intended for use with my 15mm salvage crew team for the game with the same name. My tank is now all but finished (shots later) to accompany the business of sci-fi scrap trading and recovery. I must admit, when I look at the finished terrain, it makes me want to create more bits to go along with it, this is in addition to the ones I have planned, I really should slow down and not try to add more things to my schedule, and trust me I have shed loads of stuff on the go all the time, minis, models, paintings, drawings, allsorts on my ever growing list. I guess that I just enjoy what I do!!

TTFN

Enhanced by Zemanta

The black Dog Salvage company WIP shots, Stage 2

27 Sep

So, stage two, painted and drybrushed with with a few washes, billboard added and extra light on post. still plenty to do, but on the home stretch.

Pics:

Image ImageImage ImageImage ImageImage ImageImage ImageImage ImageImage ImageImage

Incidentally, the scrap in the scrap yard is made from a broken R/C mini helicopter as well as loads of bits from electronic stuff broken up, and broken toy bits and junk from my bits box. I will be attempting to finish this model in the next few days (I gotta get some supplies first, glue and paint is running low!)

TTFN

 

 

Enhanced by Zemanta
%d bloggers like this: