Tag Archives: floorplans

New Grinning Skull Releases for July: Part four.

26 Jul

We’re on the home straight now, with the final part of this month’s releases so far (There are more to come, trust me) so, here’s this part for those of you into Miniature gaming…

Quick Quest Poster maps.

The Quick Quest poster map range is new, and each includes a massive sectional print out giant poster map of a generic playable gaming surface. Each map comprises of 4×5 A4 pieces that can be assembled into a full colour themed gaming mat for miniature gaming. Just print out, join together, stick your minis and scenics on, and your away. Currently, there is a total of six in the series, with new posters on the way.

You can find all of these titles and the bundle containing the first four releases at a discount by visiting this page at our RPGnow store here: http://www.rpgnow.com/browse/pub/8807/Grinning-Skull-Studios/subcategory/24344_28292/Quick-Quest-Poster-Maps

Also available at our DriveThruRPG and WargameVault stores (Links below)


I shall be back later to let you know about what’s coming out next and other random babblings!!

Grim’s Dungeons of Doom: Starting at the bottom, Dungeon Floors.

31 Jul


PART 3: The Base Board.

As promised, here’s the next part of the dungeon build. This time we are going to be talking about making dungeon floors, more specifically a flagstone floor base board like the one in my own modular dungeon system.


First off your going to need a large board as the base for your floor. I used a piece of hardboard for mine, its cheap and easy to work with. You could use whatever you want, I just used it as I have several big bits laying around, but MDF or thin ply would do just as well. The added bonus for me at least is that large thin pieces are easy to store behind wardrobes and other furniture out of harms way until I need to use it. If storing large pieces is  problem, you could use smaller bits that fit together (even though I have one big main one, I do have a couple of smaller ones for when I run out of room to create bigger dungeons.)

What you will need for this method is textured foam backed bathroom mosaic tiled wallpaper. Using this stuff is fantastic for terrain making in general, its uses go far beyond just dungeon flooring. It saves a ton of time carving and making detail, as its all done for you.


As you can see, it has a raised stone effect pattern. Ideal for simulated flagstones. At 28mm size it has loads of detail that will give you a brilliant effect, check out this close up and you’ll see what I mean.


It comes in a variety of colours, all of which are just as good (since you’ll be painting it anyway) If your willing to fork out for a roll of it, it’ll set you back under £10 (thats in the UK, I’m pretty sure you can track down something similar in the rest of the world) If you don’t want to put your hand in your pocket, a good way of getting it is to visit your local decorating or DIY shops, or where ever sells wallpaper where you are. Most of the time, these shops will be more than willing to give you big sample pieces for you to take home. A good idea if your doing this, is to not reveal what you want the bits for, just tell them your redecorating and not making models with it! Another way to get sample pieces is to go online and ask. This is better for smaller terrain bits since they are usually A4 sized sheets (easy for the companies to send through the post) My advice is to go and buy a roll or two of your preferred textured paper, it’ll serve you well and you’ll have more than you’ll ever need. The online ordering of samples is good too as you’ll be able to go to at least 10+ different places and get loads of free textured sheets for other projects, these below are some decent ones I’ve been using during this build.





Ok, so back to the build. The next bit is quite simple, no big mystery. Get your board and stick your paper to it! You can use PVA or wallpaper paste, although PVA dries quicker.make sure if you have more than one piece to stick to the board, to line it up carefully and accurately of it’ll look wrong.

Once you have done that and its dry, paint it up black with either cheapo spray, or some other cheap paint. You can by all means use acrylic, but I recommend using the cheapest way you can, as you can get through a ton of paint if your making large areas like this. Water based emulsion wall paint is great if you can get it in black or dark grey (I think its called latex paint elsewhere)

As you can see, my dungeon pieces are grey stone, so I advise for the uniformity and look you use the same colour scheme and tones for the whole dungeon. I achieve this by the emulsion method. I use the same mid grey wall paint for everything then it all tones in.

Once you have the undercoat done, gradually start drybrushing the board with dark grey graduating up to your desired tone you prefer (if you use emulsion, you can use cheap white emulsion to lighten it up,what ever you can get your hands on.)

Don’t forget to seal it in with some matt varnish (I used several coats,which is why some thought I’d used linoleum for the flooring, which you could do, although it might make the process more expensive, and your board lots heavier!)


And thats all there is to it. if you follow this process and advice, you’ll have a base board for your dungeon similar to mine! as you can see from the above pic, it looks very cool, and requires minimal effort and is quick to do.

So, I hope you enjoyed this article and got something out of it, so next time I’ll be telling you how to construct your wall pieces, again really quick and simple and a nice end result. Ciao!!

Crowdfunding Spotlight: 15mm-32mm Terrain Maps Aftermath Mods Kickstarter

31 Aug

Now I’m back from my holiday, I want to point out this new KS from the guys at Aftermath Mods. If you recall, earlier this year they had some success with the modular terrain warehouse campaign, and they are back this time with something that will appeal to modern wargamers and RPGers. These 2D maps are going to be useful for any number of genres and scales, and is especially handy for 15mm zombie gamers like myself, to allow a bit of indoor fighting if your a bit bored with having to play your skirmishes on an outdoor terrain board.

There’s plenty of map options, and if you need them pre-printed, there’s an option for that too! I think there’s a lack of stuff like this available on the whole, lets hope in the future, us gamers will get more maps like these, especially scaleable to 15mm as with the PDFs they are offering.

Whilst I do like the idea, my only criticism is that I’d like them to have more detail and colour on them, or even some way of incorporating a card building system to fit over the top that you can remove when a building is entered etc. That would be very nice indeed.

Still, there’s nothing to say you can’t do that for yourself with a bit of forethought. Anyway, they are a handy thing to have for games, and remember you can print out as many copies as you like and no doubt, create huge custom boards.

Go and check the project and give them a hand raising the remaining funds needed to make the campaign a success!

Terrain Mapping for your RPG and Heroclix games, 15-32mm by Aftermath Mods — Kickstarter.

Enhanced by Zemanta
%d bloggers like this: