Tag Archives: apc

Scratch Build Khorne Chaos Rhino (How to make 40k Chaos Rhinos for pennies part 3)

18 May

prox rino title3

DSCF8565

Hello again, time for the reveal of the second scratch build Rhino, the Khornate version.

This one turned out to be quite a little chunky monkey. I think it was the textured wallpaper used in this build. Don’t get me wrong, it has given the vehicle a nice, almost corroded skin for the most part. That gives it a more armoured profile, plus the big chunky rivets and plates just add more to that feel.

DSCF8561

From the front profile, you can see this is no delicate transport, just a solid lump of mechanical parts, bolted together and sent to war. The paint application here was basic than my usual (mostly to cut my time down, and also since it wasn’t for me (sorry son) but if you think about it, a load of Khorne worshipping marines wouldn’t think about beautifying such a thing, they would more likely be enamored by the sheer “Spiky Death dealing awesomeness” of this beast! The scheme is different from the Ceros prototype, sine for one, I didn’t have it on hand as a reference, and both he and I know that even he (My son) doesn’t really have a defined final idea for his overall army, just that it’s mostly mental Khorne renegades, so I just went with a palette that khorne would approve of.

DSCF8571

The “figure head” was constructed from the old staple Dollar/Poundshop Halloween Skeleton garlands that we crafters love for bits, adding some horns and spikes with Milliput and plastic spikes. With further raids of the bits boxes, I just added whatever I felt like, and like I keep saying, none of this build was meant for the end result to be a masterpiece, just spending as least time as I could to create both rhinos (if I’d wanted to I could have easily sunk days into detail, but I’d like to think I could knock up 10-15 up of these, from start to finish in less than a week at a push)

Since the side panels were a little devoid of detail, I opted to put a big Khorne symbol on one side (Which saved me from having to create some time consuming details, and gets the message across about which side it’s on!) Don’t get me wrong, If need be, I would have made whatever, but time was in the essence here, so a bit of 2mm fun foam cut out would be sufficient.

DSCF8568

The main weapon was created from a plastic halloween candy container I have had in my bits for years, and yeah I know, it’s kind of weird. I did originally consider using the brassy scheme, but I just ended up going with the same bone theme as the neck of the big daemon head which helped tie both parts together. I think it works, but if I had to do it all again, I’d try it different. Besides, it’s not for me, and my son did say that if I made him another tank, to go more spiky and death metal with it, so I greatly exaggerated everything and he’s happy with the result.

Like I said, I do like the end result, just I know I can do better next time, I find that knowing when to stop is very difficult normally, so in this case I couldn’t justify any more time to add this and that, or add more weathering and paint effects as I might do. I would say that what bugs me the most is not having the Khorne Ceros APC on hand from before was and still bugs me, as I would have liked to make sure they matched, plus I still haven’t seen them side by side to compare. I’ll try to get them back to take some side by sides pics and post them, as I will with the Nurgle versions as well (but I know they match for sure, as I can see them as I type right now.)

DSCF8565

Anyway, hope you enjoyed the post, a little bit overdue I know (My garden has been taking a lot of my time, so bare with me!) I have another post to come straight after this to make it up to you, so standby for that. Let me know what you think, any suggestions, comments and such, and I’ll see you in the next post!

Khorne Chaos Marine Ceros APC (Rhino Proxy),The prototype that started it all!

8 Feb

khorne ceros

Well, I did say that I would be back for more 40K type nonsense, and since loads of you liked the Deathguard Ceros APC, I am going to show off the prototype that began it all, just so I can show the contrast and difference between the exact same base build. Like I told you before, the Ceros was made from templates so that each of them have a uniformity, which I thought added some degree of validity to it as a real thing and not a random scratch build.

DSCF8507

Sure, its fine if you want to go crazy and create each thing completely different, I wanted that connection of familiar shapes, so when my vehicles are on the battlefield there is
no doubt these are cut from the same cloth.

DSCF8508

This Khornate Ceros was kept plain for a reason, so when placed together, you would see that each tank would get progressively more extreme in what I do with them.
Of course you could just keep them identical and vanilla, but I think that would bore the shit out of me. Variation keeps things interesting, especially with Chaos
as this Ceros will probably end up as the most normal looking one from the bunch (I plan to make a unit of three Khornate Ceros, as well as my three Nurgle ones)

DSCF8501

I am seriously thinking that the next one is getting a serious boost in armour, weapons and good old spikey bits. Also a big brass bull head springs to mind, or brass
daemon head. The final one will get the daemonic mutation treatment, full on spiked talons, screaming obscenities bursting out in rage as the tank is consumed by the
warp to become fused as one. My plan is to do that also to my Nurgle ones as well, just more gross and disgusting.

DSCF8503

I’m thinking these evolution’s will get a little more ambitious, the Khorne ones might have a electronic gubbins added in for effect, or inter-changeable parts or whatever,
to me, this allows me to not get bored, try out new stuff and show off the versatile nature of these tanks. You’ll have to wait and see.
It is a shame that I don’t have any Khorne worshiping marines to show next to the tank, but I don’t know how many times I have had a Khorne force, far too many!

DSCF8505

This time it’s fine, as this belongs to my son, so it’s all good. Maybe if I was to choose another, it would be Tzeentch so I could get really trippy and Egyptian like!
I do have a whole bunch of these Terror bird alien warriors from CP models that I would use as proxy Tzangors, so who knows? I think I’d do it just for the buzz of doing it,
I can think of lots of mad additions to the Ceros, like maybe a Sphinx thrown into the mix, or King Tut head with guns or missile launchers coming from the eyes and mouth!
If I sit down and make an extra Ceros, I’ll do that I think, just for shits and giggles! Then I would have to expand on it, with more Tzeentchy troops and daemons.
I do have the massive Dred to finish painting, that really needs doing, as I have another identical base model (Scotia Grendel war Golem) that I promised my kid, which I’ll get
the chance to Khornise it, which will be fun!

DSCF8502

The good thing about the proxies, is that I was going to totally make a great unclean one and Bloodthirster from scratch, yes I know the newer models are quite massive, but
I’d get a real kick out of doing a good job on them, plus it would be at a fraction of the cost of buying them. The funny thing is, I haven’t even shown what else I have already
to add to my forces! Mantic future zombies (whatever they are called) are stand ins for both my sprawling cultists and proto-poxwalkers, plus loads of kit bashed cultists made
from the out of production Sci-fi Germans, gripping beast Saracens, hooded robed cultists from black cat bases, and various psychos that give me at least 80+ cult nutters to swarm
my enemies (and look cool as fook!!) I’ve more units of spawn, one of them made up from giant worms and maggots, others from faceless horrors, there is a shit ton!
I love the proxy approach, as it gives flexibility to have any cool stuff from GW, plus other manufacturers models that fit, and any customs.

DSCF8504

Also it guarantees that your army is totally unique, stun your opponents with how fucking cool your army looks, and it cost you less than a quarter of most GW only forces! I am Win!!

Back to the Ceros. I know I said there would be three (3 Khorne, 3 Nurgs) but similar to the GW Rhino, I was planning a addition of a few extra bits to the Ceros template, and Voila! a new variant is born, a proxy Landraider! I have no idea what that would be named, something like “Battle-marauder” or “Un-relentor”, or something suitably big and destructive!
Maybe, I’ll just adapt the third Ceros of the units to that, saving me time. It all depends on how much enjoyment it brings making them, if it looks cools as fuck, then I’ll just make
the unit of 3 Ceros and a Landraider proxy (although, the Ceros could be used as one anyway, I just think it needs doing anyway! Just because!!)
Anyway, I think I’ll show off some 40k-ish terrain next time, possibly a set of Mining stuff, or Industrial towers. there is so much I can show, I can’t even remember all the stuff I’ve
made! Seriously!
Thanks for taking a look at my stuff, I do hope it inspires you to do your own things, or just gives you some cool things to look at, either way I hope you enjoy this content, I’ll be
back later, hopefully to release the PDF I keep stalling on, or show my terrain! Did I tell you that the modular industrial stuff and buildings are compatible with my “Grim’s Dungeons of Doom” scenery?

Well, put it this way, I have a hell of a lot of options for my set ups…..

 

Death Guard Proxies: Nurgle Ceros APC Scratch build. (Proxy Rhino/Landraider Build)

7 Feb

log title ceros1

It’s been ages since I’ve shown off any of my Nurgle Deathguard Army lot, and whilst looking through my photos, I remembered that I haven’t shown you this build.

Given that many who read here are dedicated miniature addicts and tabletop wargamers, I thought it was time to showcase this one, as I am quite proud of this baby. May I present, the proxy Deathguard Ceros pattern APC.

chaos cer1

May I present my scratch built Chaos weapon of mass destruction, the Ceros pattern APC. This is entirely scratch built from whatever I could get my hands on, and from my own imagination. My main aim here was to create a vehicle that would serve as either a Rhino or Land raider type troop transport for my Deathguard boys, and be easy enough to replicate at a tiny fraction of buying a genuine GW or other proxy type. It’s not meant to be flash, or accurate a copy of said APC in 40k, just a cool looking beefy armoured thing to strike fear into the enemy.

chaos cer2

I made a set of templates for the main shape of the un-mutated vehicle, then constructed the body from foamboard, then just Nurgled it up (I know that is not a real word) to make it fit in. I had already made a less diseased looking one for my son (a Khorne version without the mutations) but I’ll post pics of that later. I’m pretty pleased with it to be honest, and given that it probably cost less than £5 to make both in total, my intention was to make a fleet of them for my plague marines. My Army has taken a bit of a respite, but I won’t give up with my plan, and eventually I will get round to completing them, at some point.

chaos cer3

I still have the templates around somewhere, so maybe at some point I’ll release them, or may actually do a tutorial if enough of you out there want that, maybe a PDF book with them included. This one was a test to see what needed doing to it to make them as disgusting as possible, which now I made it, I can say that the next one would be even more weird than this one. I’d like to let my imagination go wild with the other two I plan, maybe some demonic attributes and things bursting out from the hull, far more complex that this one was.

chaos cer4

With the templates it’s very easy to replicate the design, so I would love to build some more, even some standard looking ones and maybe get a small force of normal marines, just to have a bash at them. It’s just that the whole idea of being able to mutate them into unique models really appeals to me, and I’d love to do several different ones, Thousand Sons, Emperors Children, Imperial guard, or whatever, I’d like to have a go at each and everyone of them. Sadly, I won’t get round to them all, things take time, but I will end up doing the other two Nurgle ones, and another two Khornate ones, each getting more twisted as I make them. I can imagine by the last Nurgle one, it’ll be half daemon or whatever, and the Khorne ones will end up bristling with spikes, skulls, weapons and death dealing articles (well, I did promise my young un’ two more) I just thought I’d show this one off, as I’d totally forgot to do so. I’ve even got a whole heap of industrial style modular terrain already built, and I haven’t shown them off too! Very Necromunda, and again made from scratch. If I can get some good lighting to give them a decent set of shots, I’ll do it in the next week, and bear in mind that I created all these things months ago, a long time before many of the various Youtube Terrain channels did similar as well! I’ll be pinning these pics to my boards on Pinterest and would appreciate it if you frequent there, to share them about, and you can see the other finished bits of the Deathguard Proxies there too: https://www.pinterest.co.uk/grimacereaper73/

Please give me a follow and share on there, I actually get a ton of traffic from Pinterest to here, and I quite like the site no I have the hang of it! I don’t have a ton of followers there, but would be very grateful if you are a regular there to give me a follow, it helps this site, and gives me a bit of a boost to see people sharing my content, and it’ll make me more determined to put more stuff on there. (Trust me, I only show a small fraction of hobby related stuff I create, so the boost would give me the incentive to put more stuff up!)

chaos cer5

Like I said, if there is enough people asking for a sort of tutorial type of thing that shows how to make one of these brutes, I will do it, but only if you lot ask, or it will be sporadic when I get round to it. I have too many of my fingers in too many pies, so unless there is a call, I’ll just do it when I can/feel like it! I’m thinking more like a PDF manual type thing, with the patterns in and a load of nice photos, maybe a PWYW or cheapo price, just so the effort is worth my time (I’m a busy dad of 4 sprogs, so time is precious you know!)

If you want to ask anything about how I made it, where I got the bits, how robust it is (yes, it’s quite robust enough to take being knocked about and such) then please do, leave me some likes and comments, heck, ask me to post more shots if you like, or if you want to see the prototype (Khorne) APC, then let me know, and I’ll happily do so.

By the way, if you are wondering what the name of this proxy comes from, well if it’s not obvious, Ceros is the Rhino proxy, so Rhino + Ceros = RhinoCeros! It just seemed fitting!

Anyway, hope you enjoyed the pics, don’t forget to check out the Payhip store for stuff: https://payhip.com/grinningskullstudios which is slowly gaining momentum (Thanks for all the views and orders there too!) and the DriveThruRPG pages too for loads of ever growing hobby stuff: https://www.drivethrurpg.com/browse/pub/8807/Grinning-Skull-Studios

(Gotta keep plugging away!!) Again over on Pinterest and our page on Facebook (Give us a like, go on, you know you want to!) If you are a linked in user, feel free to hit me up on there as well on my Linkedin profile page (I’m now a Linkedin L.I.O.N. now, so join my big network if you like! Nearing almost 6500 connections there, so if you use it, check me out there too!) I’m on Twitter too, but not that active, but a follow would be noice!

I’ll be back later with more stuff, perhaps the Khorne APC to show the difference, but for now, I hope you have a great day and may Grandfather Nurgle bestow his pungent effluent upon you (Wow, an Osric Tentacles reference…) I’m almost done finalising the latest Pointless Classics PDF, so I’ll be posting about that too, so see you then!!

Paper Forge BMP1 tank at Wargame Vault

14 Jan

1249431609a

BMP-1 Paper Model (Enhanced LoD) – Paper Forge | Modern Vehicles | Wargame Vault.

I love papermodels, they are the cheap and cheerful cousins of plastic kits, with the added bonus of the ability to keep churning them out just for the cost of card & ink. There are plenty of useful ones around with applications for wargaming and this is no exception.

Many of you who are regular visitors to TMP (the miniatures page) may have noticed this on the news page, but for those who haven’t, I thought I would point it out, as if you are strapped for cash, this could be right up your alley. The model is generic enough to fit anything from modern games, right through to future conflicts, and as I mentioned, you can resize it to fit your gaming scale (There’s even a little scale note included so you can print it at the right size for your required needs! Pretty cool!)

With a little tinkering it could be adapted to create different vehicles, and by the looks of the actual kit (which is available for immediate PDF download from Wargame Vault) it looks like it’s quite  an easy build, so could be ideal for a starter paper modeller!

It costs $4.99 (That’s £3.09 in the UK, or 3.73 EURO) So, it’s good value when you consider you can make these models as many times as you like, in all sizes too! Check it out over on Wargame Vault and get this great kit!!

TTFN

 

 

Enhanced by Zemanta
%d bloggers like this: