Tag Archives: 15mm miniatures

4xD: But hey Mr Grim, I wanna’ game my dungeon in 15mm….

5 Oct

DDDDD

So, outside of the Grim’s Dungeons of Doom tutorials, I think I needed to have yet another sub-set of brain fart articles to cover other aspects from time to time, so here is 4xD (which stands for Dungeon developments, discourse and dialogue) in which i’ll be babbling on about my gameworld Plexus (which I wouldn’t mind developing into something cool) as well as future dungeons of doom related PDFs I’m making, and other similar themed stuff I’m planning that doesn’t fit into the main articles.

Today I want to address 15mm dungeons and just how we can adapt these techniques to suit that scale rather than the usual 28mm.

To be honest, I mainly game in 15mm and not 28mm, unless it’s WFB I don’t really have any minis in that size beyond that, so when I began this, I seriously considered going 15mm as well. I do have quite a few 15mm fantasy adventurers, but were lacking on monsters, so it was kind of a reversed 28mm situation (Where as I have plenty of monsters, yet hardly any adventurers) What swung the decision in the end was the sheer scope and availability of fantasy minis in the scale, otherwise I’d have gone smaller just for space saving.

Anyway, but just how many of these techniques I’ve been detailing? So enough of my rambling, and lets shift scale.

DSCF5200

DUNGEON FLOORS- There is absolutely no reason why the exact same technique can’t be used. Other textured  paper is available with smaller mosaic squares that would be more akin to 15mm flagstones but I don’t see why the same dungeon flooring could not be used. Another idea would be to acquire some nice cheap or free floorplans in PDF form and shrink them down 50%-65%

DSCF5344

WALL SECTIONS- The same goes with the wall sections, only with slight modification. I would recommend that the only thing that i’d do different is when detailing the texture with card block designs, is that they would scale more if the brick design was shrunk by half. Ok, this would take a little longer, but not that much. Some might also prefer to use a smaller dimension of wood pieces, although I think that this would not be essential. If you don’t want the wood method for your dungeon, consider getting some dungeon building paperkit PDFs and shrinking them by the same percent as the flooring, or for free on the web. There are a good selection that would fit on this site, check the Resources section for lists of free 3D dungeons and similar.

DSCF5472

DOORS– The chunky doors are easily done by simply shrinking the door size down only and keeping the rest of the building as is, also don’t forget that 15mm can be found for sale by several mini companies, so that’s an option too without much outlay. Opening doors like in the article are still do-able but a little fiddly, as with anything if you shrink the size. Maybe if there’s a call for it, i’ll do a tutorial for it, however you’ll nee to let me know if thats what you want!

DSCF5537

FURNITURE- It’s very difficult to get the same level of detail that you get at 28mm, but not impossible either. If you aren’t ready to micro the techniques I’ve been going on about, you can always buy the dressings in from mini companies if you look around, although this can be hit and miss. Making stuff yourself helps eradicate the frustration factor with buying, only to replace it with more frustration building it! But, hold on, there need be no angst if you think carefully. Beds are easily sorted by shrinking the sizes (use 1 lolly stick wide for single beds, 2 for double beds etc) tables, again shorten the lengths and widths (use thick card as an alternative if it makes it easier) Shelves are something more intricate, swap lolly sticks for thick card, use smaller beads and adornment, sure it’s tricky, but not hard to do. For the books on the shelves, use thinner card too for scale. Books can also be made from the books & scrolls PDF, by printing the kit out at about 50-65% (your choice) and using thin card instead of EVA foam. opening books from the kit may be trickier….

DSCF5729

CAVERN WALLS, CORNERS, DOORWAYS AND FEATURESCavern walls using expanding foam are easily done as is, or simply change the dimensions to create smaller walls of your desired height/width. It’s exactly the same with the corners and doorways, use as is or create them smaller to suit. Cavern features need no changes, just create them smaller if you need to, otherwise make as normal.

Dungeon Encounters 3

MINIATURES- Just a quick mention about 15mm minis. There are plenty of great companies who produce suitable minis for 15mm dungeon crawling. The only downfall is that you’ll really need to shop around to get the diversity needed for a proper old skool feel. Classic dungeon monsters are hard to find in 15mm, but more and more manufacturers are bringing out these classic creatures. Checkout other scales such as 10mm, 20mm and 28mm for minis that will suit. Pendraken do some cool dungeon monsters that fit well with 15mm. Don’t forget other great manufacturers to get your usual fantasy races and mosters, 15mm.co.uk, Irregular, splintered light, magister militum to name but a few. Adventurers can be plucked from all manner of historical lines at great prices much cheaper than their fantasy couterparts. Shopping around is key.

So, capping off this article, where ever possible from now on I’ll attempt to throw in some 15mm building tips too, for those of you who want to go 15mm (rather than the 28mm I’ve been detailing here). If you would like the odd 15mm dungeon article let me know in the comments about your opinions on the subject and if you’d like to see a few 15mm articles and I might oblige!

15mm Space Orcs: More and more…

4 Apr

Well, I’ll start by wishing all those reading, a happy easter, hope you enjoy your choccy eggs!

I thought I would start todays blog updates with some extra shots of my 15mm space orc army. If you saw the last post, that just detailed what I had finished thus far. This time, I want to show you the rest of the other bits, although some aint finished, I thought it would be a nice touch to see what my force is growing into.

DSCF3902

First you’ll notice the addition of feral goblins, while these fellers are primarily used for my WFB snotlings, I see no reason not to include them in my space orc forces. They’ll just be a vicious mob of skirmishing cannon fodder, designed to tie up more deadly enemy units, while my other units take care of business. I have so many 15mm goblins lying around, I might have to develop a fantasy version of the goblinoid lot.

DSCF3907

DSCF3914

Next up is vehicles. These are a work in progress. I’ve got anothe wartruck, based on a toy 4×4 monster truck. I think it’ll be suitably over the top, and a nice fit with the other. Loads of work to do on it before its done.

DSCF3928

DSCF3916

DSCF3920

DSCF3922

DSCF3919

Next up is an assault dropship, which is made from allsorts of bits. It did start as another project ages ago, which lay dormant in favour of other things. Fast forward to recent times, I decided to repurpose the original and add more bits (and I’ll probably add more) With these, its starting to feel like an invasion.

DSCF3924

DSCF3925

DSCF3926

Loads of things to be done on that, but it’ll come together eventually. Bear in mind as well that I have tons of orcs to paint up, drednaughts, runts and bits. Its probably time to think about what I should be doing to put an opposing force together. I do have a not-tyranid-ish force on the back burner, but I think I might have to try either an imperial force or a chaos one…or squats…or genestealer cult..or….!!

 

The Lead Pile. (And the question of how to tackle it!)

3 Feb

DSCF3787

Jeezus! I’m feeling slightly overwhelmed when it comes to dealing with my lead mountain. I have started to take stock of just exactly how much stuff I have accumulated and what you can see in the picture is just the tip of the iceberg. This toolbox here is just one of the various stashes of unpainted lead (and stuff that needs stripping or repainting) Plastic is another thing, there’s mostly metal miniatures in my alloy hills. I really didn’t quite understand just the volume I had until I started looking.

DSCF3790

My question really is, just how exactly do you deal with it? I’ve been having a rekindled relationship with miniature painting, so if it wasn’t enough to just decide what to paint up next, I’m thinking now about what the hell I’ve got!

I know I’m not alone in this. But why do we do it? This shiny syndrome must be put in check, but we still do it over and over with stuff we don’t need, nor ever will probably paint. I’m not saying that we don’t want the things, we do want them, and want is the optimum word here. It’s as if we are as the dwarven kings or dragons themselves, hoarding them in our deep caverns.

DSCF3788

Some might say that I should be happy that I have a choice, and I’ll agree. The only thing is I’m never ever going to get every single one of them painted. Ever. Sure, I’ll manage to do a lot if I put in some time (a long time) and effort, but theres never going to be an end in sight. I wouldn’t mind so much, but I have only come back to the hobby for the last 5 years or so (God knows what it would be like if I’d have kept going interrupted from back in the day) I’m even more confused about what I’m going to paint up and put in the queue next, just cause there’s so much to go through. I think its a battle I’m never going to win. I know I will amass more and more beyond what is a copeable  and realistic amount to have. Even when I sell vast chunks on, it still keeps growing.

DSCF3791

Dozens of manufacturers and scales, fantasy, historical, scifi, you know the score. I have no idea why I bought some of it. Is it lead fumes that make us do it? Consumer greed driven by the very limited nature of the number of castings? It makes you wonder what our true motivations are for this collecting of this pile of tiny metallic creatures? I have no real answer, just that I love the little fuckers, and if you can empathise with my condition, then you love them little fuckers too!

Right, what next then?…

Taking inspiration from life….

9 May

Some of you may wonder why exactly I have taken upon myself to at some points, to sculpt strange chicken mutant creatures in my endeavors.

The Clukkatrix and the chukk being the examples I’m referring to (in the photos), but I do get asked just why my creations come about.

clukatrix

Simply put, the things around me influence me a lot, and in these instances I admit are inspired by my chickens. I’ve kept chooks for a few years now, and since having a flock I wish I’d done it years before. Not only are they easy to keep and maintain, but provide an essential service to myself and my clan (well, egg production)

As much as I love my cats, I think I actually prefer chooks (sorry cats!) not that my cats don’t provide usefulness around my home (they keep the woodmice getting in our house) but when your getting a box or more of free range eggs everyday (you know how much a box of large free range eggs are nowadays, anything from £1.50+) it’s hard to not admire them from their household input. I find them fascinating, and spend ages watching their behavior and nuances, each one with separate personalities, studying them more and more you see the similarities to the prehistoric, I imagine that dinosaurs were similar to them in both movement and ferocity (yes, chooks are sometimes very aggressive to each other, other animals and humans) There is indeed something extremely primordial and raw about these creatures that intrigues me, hence the miniature chicken references.

Simply put, I love my chooks.

To top things off, I’ve been incubating for the past few months with no avail, that is until yesterday. Now I have to say all the patience and constant temperature and humidity checking has paid off.

chook0004

Finally, with today’s latest arrival, that’ll be 10 in total from the 12 that were incubated, not bad me thinks! although these tiny polish bantams are no trouble to house and feed, I’m sure that things will change really rapidly and they’ll soon need loads of room and cost a kings ransom to feed!

All in all, will this lead to more mini-sculpts of chicken related mutants and madness? Probably not, but I’ve always wanted to make the Chukkasaurus Rex……

 

Enhanced by Zemanta

Dropship Horizon Blog Launches Titanium Dropship 2014 ; 15mm sci fi miniature painting comp!

17 Jan

For those of you out there into 15mm sci-fi, Dropship Horizon have launched their comp for 2014. There are loads of 15mm companies putting up stuff as prizes, so if you think your skills at painting and modelling in 15mm with a science fiction flavour are up to it, get yourself along and take part.

I might see you in the entries, (time permitting) but you never know! There’s plenty of scope in the three categories to get your brain cells into ignition, plus it’s great to see the emphasis solidly on the whole 15mm scifi wargaming genre.

Kinda makes me think we shouldn’t be doing some kind of comp, here at the Grinning Skull? what do you think?

Anyway, go check it out and get involved!

DROPSHIP HORIZON: Titanium Dropship 2014 – 15mm sci fi painting competition.

Enhanced by Zemanta
%d bloggers like this: